Safe, Automatic, and Cost-Effective Solutions for Oily Compressor Condensate—Industrial & Marine Ready
- Safely separate or evaporate oily condensate from air compressors
- Helps you comply with environmental regulations: typically ≤50 ppm oil in water
- Minimal maintenance and operator intervention required
- Dual safety features on ConEVAP; CCS units feature patented activated carbon filter
- Multiple sizes to fit any facility or marine application
- Industrial and marine wastewater solutions since 1995
IN STOCK. READY TO SHIP. PROBLEM SOLVED.
No need to wait. The ConEVAP system is ready to turn your facility into a “ No Discharge Zone ” with safe, automatic evaporation.
CCS – Compressor Condensate Separator
01
Design & Construction
- Gravity-based oil-water separation: no moving parts, low-maintenance operation
- External activated carbon filter polisher: easy to change without entering the unit
- Tough, impact-resistant high-density polypropylene construction
- Two coalescing packs for longer-lasting filtration
02
PERFORMANCE
- Achieves effluent levels below 15 ppm oil in most compressor oils
- Meets or exceeds state and federal environmental standards
- Simple flow-through design allows multiple condensate streams to be piped together
03
Operation
- Automatic, unattended operation: minimal attention required
- Easy installation: wall, floor, or marine bulkhead mountable
- Filter replacement intervals: 9–12 months for standard oils; 6–9 months for polyglycols
- Visual and sampling checks to know when filters need changing
04
Applications
- Industrial plants and compressor rooms
- Marine vessels and offshore platforms
- Facilities seeking EPA and state-compliant oily water separation
- Any air compressor system: compressors, aftercoolers, separators, receivers, dryers, filters
Why CCS Matters
CCS units offer the most economical, safe, and reliable solution for separating oil from water. Avoid expensive disposal by licensed haulers, reduce environmental impact, and meet legal requirements with minimal intervention.
ConEVAP – Compressor Condensate Evaporator
01
Design & Construction
- Stainless steel insulated tank with sight glass
- Dual thermostats and high/low-level cut-offs for safety
- Two drain valves for partial or total draining of oil concentrate
- Compact and rugged: designed for industrial and marine environments
02
PERFORMANCE
- Zero Liquid Discharge (ZLD): converts condensate to vapor, leaving oil concentrate
- Handles a wide range of compressor oils, including synthetics and petroleum-based
- Evaporates up to 25 gallons per hour, available in 7 sizes
03
Operation
- Industrial plants and marine vessels
- Facilities requiring zero discharge wastewater management
- Companies pursuing environmental management programs or ISO 14001 registration
- Operations with high-volume or difficult-to-separate oily condensates
- Minimal maintenance: only occasional draining of concentrate after multiple tank volumes
- Energy-efficient insulated tank conserves power and maintains safe operation
04
Applications
- Industrial plants and marine vessels
- Facilities requiring zero discharge wastewater management
- Companies pursuing environmental management programs or ISO 14001 registration
- Operations with high-volume or difficult-to-separate oily condensates
Why ConEVAP Matters
ConEVAP is the ultimate solution for facilities that cannot discharge oily condensate. With automated operation, dual safety shutoffs, and a range of sizes, it provides peace of mind, compliance, and efficiency in one compact package.
ConEVAP™ Capacity / Utility Chart
| Model No. | Capacity (Lbs/Hr) | Capacity (Gals/Hr) | KW | Amps | Volts | Shipping Wt (lbs) | Phases | Dimensions (H x L x W) |
|---|---|---|---|---|---|---|---|---|
| CE-6 | 15.8 | 1.9 | 6 | 11 | 480 | 546 | 3 | 48-1/8" x 46-1/8" x 20-3/8" |
| CE-12 | 34.2 | 4.1 | 12 | 19 | 480 | 550 | 3 | 48-1/8" x 46-1/8" x 20-3/8" |
| CE-18 | 51.6 | 6.2 | 18 | 21.7 | 480 | 618 | 3 | 48-1/8" x 46-1/8" x 24-3/8" |
| CE-24 | 69.1 | 8.3 | 24 | 28.9 | 480 | 624 | 3 | 48-1/8" x 46-1/8" x 24-3/8" |
| CE-36 | 104.1 | 12.5 | 36 | 43.4 | 480 | 633 | 3 | 48-1/8" x 46-1/8" x 24-3/8" |
| CE-54 | 156.6 | 18.8 | 54 | 65 | 480 | 819 | 3 | 48-1/8" x 46-1/8" x 44-3/8" |
| CE-72 | 209.1 | 25.1 | 72 | 86.7 | 480 | 834 | 3 | 48-1/8" x 46-1/8" x 44-3/8" |
Tip: This chart helps you select the right ConEVAP model based on your condensate volume, power availability, and space constraints.
Frequently Asked Questions
What oils can CCS and ConEVAP handle?
Most petroleum and synthetic compressor oils, including polyglycols, diesters, synthetics, silicones, and mixtures.
How often do I need to maintain these units?
CCS units: filter change every 6–12 months depending on oil type; complete cleaning every 2 years. ConEVAP: only drain concentrate periodically.
How do I know what size I need?
Both CCS and ConEVAP are available in multiple sizes. Our experts can recommend the best fit based on your condensate volume.
Can these units operate unattended?
Yes. CCS is fully automatic with flow-through filtration. ConEVAP has dual safety shutoffs, high/low-level cut-offs, and thermostats for unattended operation.
Are these solutions compliant with regulations?
Yes. CCS units achieve effluent below 15 ppm; ConEVAP provides Zero Liquid Discharge, helping facilities meet EPA and state standards.
What happens if my condensate volume suddenly spikes?
Both CCS and ConEVAP handle variable flows—ConEVAP’s automatic shutoffs and CCS’s flow-through design ensure safe, uninterrupted operation.
Cut Your Wastewater Volume — Onboard or At Your Plant
- Turn bilge and gray water into vapor with the BilgeVAP™ Electric Evaporator. Built tough. Runs clean. Effortless operation onboard or on-site.